Currency plugin development.
Start from reading Blockchain and Wallet doc.
Note: you can skip optional methods if they are not supported by your coin.
Coin API research.
First of all need to start your coin node locally or inside VM and try to access it via HTTP e.g. using
You need to study your coin API to get list of calls for implementing Blockchain and
Note: single method may require multiple API calls.
We next list of JSON RPC methods for Bitcoin integration:
* getblockcount * getblockhash * getnewaddress * listaddressgroupings * sendtoaddress
For Ethereum Blockchain (ETH, ERC20) we use next list of methods: * eth_blockNumber * eth_getBalance * eth_call * eth_getTransactionReceipt * eth_getBlockByNumber * personal_newAccount * personal_sendTransaction
Ruby gem development.
During this step you will create your own ruby gem for implementing your coin Blockchain and Wallet classes.
We will use peatio-litecoin as example. My advice is to clone it and use as plugin development guide.
- Create a new gem. And update .gemspec. 💎
bundle gem peatio-litecoin
Note: there is no requirements for gem naming and module hierarchy.
- Add your gem dependencies to .gemspec. 🛠
I use the next list of gems (you could specify preferred by you inside you gem): ```ruby spec.add_dependency "activesupport", "~> 5.2.3" spec.add_dependency "better-faraday", "~> 1.0.5" spec.add_dependency "faraday", "~> 0.15.4" spec.add_dependency "memoist", "~> 0.16.0" spec.add_dependency "peatio", "~> 0.6.1" # Required.
spec.add_development_dependency "bundler", "~> 1.16" spec.add_development_dependency "mocha", "~> 1.8" spec.add_development_dependency "pry-byebug" spec.add_development_dependency "rake", "~> 10.0" spec.add_development_dependency "rspec", "~> 3.0" spec.add_development_dependency "webmock", "~> 3.5" ```
Note: peatio gem is required.
- Install your dependencies.️ ⚙
- Save responses in spec/resources. 📥
You could start from saving few responses and then extend your mock factory. Peatio-litecoin spec/resources directory has the following structure:
tree spec/resources spec/resources ├── getbalance │ └── response.json ├── getblock │ └── 40500.json ├── getblockcount │ └── 40500.json ├── getblockhash │ └── 40500.json ├── getnewaddress │ └── response.json ├── listaddressgroupings │ └── response.json ├── methodnotfound │ └── error.json └── sendtoaddress └── response.json
- Prepare your gem structure. 📐
You could organize files and directories as you wish. Peatio-litecoin has the following lib and spec structure:
tree lib lib └── peatio ├── litecoin │ ├── blockchain.rb │ ├── client.rb │ ├── hooks.rb │ ├── railtie.rb │ ├── version.rb │ └── wallet.rb └── litecoin.rb tree spec/peatio spec/peatio ├── litecoin │ ├── blockchain_spec.rb │ ├── client_spec.rb │ └── wallet_spec.rb └── litecoin_spec.rb
- Start with your coin client implementation. 🥚
First of all try to find reliable ruby client for your coin and implement own if there is no such. We don't provide client interface so you could construct client in the way it's convenient for you but note that it's your gem base because you will use it widely during Blockchain and Wallet implementation.
- Try to call API with your client. Use ./bin/console for this. 📮
client = Peatio::Litecoin::Client.new('http://user:[email protected]:19332') # => #<Peatio::Litecoin::Client:0x00007fca61d82650 @json_rpc_endpoint=#<URI::HTTP http://user:[email protected]:19332>> client.json_rpc(:getblockcount) # => 1087729 client.json_rpc(:getnewaddress) # => "QQPyC9uTQ1YKu3V1Dr4rNqHkHgJG3qr8JC"
- Use spec/resources for client testing. 🧰
E.g. specs for peatio-litecoin client:
bundle exec rspec spec/peatio/litecoin/client_spec.rb Peatio::Litecoin::Client initialize should not raise Exception json_rpc getblockcount should not raise Exception should eq 40500 methodnotfound should raise Peatio::Litecoin::Client::ResponseError with "Method not found (-32601)" notfound should raise Peatio::Litecoin::Client::Error connectionerror should raise Peatio::Litecoin::Client::ConnectionError Finished in 0.01355 seconds (files took 1.11 seconds to load) 6 examples, 0 failures
- Implement Blockchain::Abstract interface required methods. 🔗
module Peatio module Litecoin class Blockchain < Peatio::Blockchain::Abstract # Your custom logic goes here. end end end
I suggest using the next order of methods implementation:
* initialize * configure * latest_block_number * fetch_block! * load_balance_of_address! (optional)
- Mock API calls using spec/resources and test your blockchain.️ 🛡
E.g. specs for peatio-litecoin blockchain:
Peatio::Litecoin::Blockchain features defaults override defaults custom feautures configure default settings currencies and server configuration latest_block_number returns latest block number raises error if there is error in response body build_transaction three vout tx builds formatted transactions for passed transaction multiple currencies builds formatted transactions for passed transaction per each currency single vout transaction builds formatted transactions for each vout fetch_block! builds expected number of transactions all transactions are valid load_balance_of_address! address with balance is defined requests rpc listaddressgroupings and finds address balance requests rpc listaddressgroupings and finds address with zero balance address is not defined requests rpc listaddressgroupings and do not find address client error is raised raise wrapped client error Finished in 0.02604 seconds (files took 1.14 seconds to load) 16 examples, 0 failures
- Implement Wallet::Abstract interface required methods. 💸
module Peatio module Litecoin class Wallet < Peatio::Blockchain::Abstract # Your custom logic goes here. end end end
I suggest using the next order of methods implementation:
* initialize * configure * create_address! * create_transaction! * load_balance! (optional)
- Mock API calls using spec/resources and test your wallet. 🔐️
E.g. specs for peatio-litecoin wallet:
Peatio::Litecoin::Wallet configure requires wallet requires currency sets settings attribute create_address! request rpc and creates new address create_transaction! requests rpc and sends transaction without subtract fees load_balance! requests rpc with getbalance call Finished in 0.01205 seconds (files took 1.08 seconds to load) 6 examples, 0 failures
- Register your plugin blockchain and wallet to make it accessible by Peatio.️ ®
Peatio::Blockchain.registry[:litecoin] = Litecoin::Blockchain.new Peatio::Wallet.registry[:litecoind] = Litecoin::Wallet.new
For more info check hooks.rb and railtie.rb.
Note: You could just copy paste this files and change wallet and blockchain names.
- Test your plugin inside peatio eco system. 🧪
Every story which touch blockchain or wallet should work successfully:
* deposit address generation * deposit detection * blockchain synchronization * deposit collection * withdraw creation * withdraw confirmation
- Document your plugin integration steps. 📝
Documentation folder for Litecoin has the following structure:
Describe full plugin integration flow in integration.md. Image Build and Peatio Configuration sections are required.
Don't forget to describe custom steps here e.g.
"Send some XRP for wallet activation" or "For ERC20 integration fee wallet with ETH is required".
List all API calls used for gem development here with examples and description.
Give instructions how to get coins in testent.
Note: it's minimalistic doc structure. More doc is more love for your plugin.
- Contact us to review your plugin and add to approved plugins list.
For doing it left comment with your plugin link and short description here.